XMT® 450 CC/CV
Portability and excellent arc performance make the XMT family the most popular in the industry. The XMT® 450 CC/CV is the most popular model for its flexibility and simplicity.
has the flexibility to be used with spool guns, feeders, and remote controls.
Optional 115-volt auxiliary power
provides 10 amps of circuit-breakerprotected power for coolant systems, etc.
Optional Welding Intelligence™ system
XMT CC/CV and MPa models are Insight-capable to monitor weld voltage, amperage, and arc-time and percentage.
in all welding processes.
Adaptive Hot Start™
makes starting stick electrodes easy without creating an inclusion.
Infinite arc control
available in the stick and wire modes for easier fine tuning of tough-to-weld materials and out-of-position applications.
provides arc starting that minimizes contamination of the electrode and without the use of high-frequency.
Wind Tunnel Technology.™
Internal air flow that protects electrical components and PC boards from dirt, dust and debris… greatly improving reliability.
cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
Unique case design
helps protect internal components from dirt and dust. To connect input power cord and/or set unit up for correct input power, remove the easy-to-handle panel (1/3 case). The remaining two-thirds of the case never needs to be removed!
Process selector switch
reduces the number of control setup combi nations without reducing any features.
Large, dual digital meters
are easy to view and are presettable to ease setting weld output.
Ultra-tough, polycarbonate-blended cover
protects front controls from damage.
Primary voltage display
shows what primary voltage the power source is linked for without removing the sidepanels. Saves time and assures you that the power source has been correctly linked for available input voltage.
Auto Remote Sense™
enables unit to automatically use remote control if connected to remote control receptacle.
|MIG (GMAW)/Pulsed MIG (GMAW-P)*
Air carbon arc cutting and gouging (CAC-A)
Rated: 5/16-inch carbons
Capable: 3/8-inch carbons
*Available on select models.
|Title||XMT® 450 CC/CV|
Power generation plants
|Weldable Metals||Thin to thick,
0,8-1.6 mm solid,
|Input Voltage||230/460 V, 400 V (CE) or 575 V|
|Input Phase||Requires 3-phase power|
|Input Hz||50 Hz|
|Amperage Range||15 – 600 A|
|Output Range||10–38 V, 15–425 A|
|Rated Output||450 A at 38 VDC, 100% duty cycle|
|Max Open Circuit Voltage||90 VDC|
|Net Width||368 mm (14.5 in.)|
|Net Height||438 mm (17.25 in.)|
|Net Length||689 mm (27.125 in.)|
|Net Weight||55.3 kg (122 lb.)|
Miller’s True Blue Warranty