- Home
- / Product Categories
- / Accessories / Gas control / GasSaver Outlet Points
- / GasSaver Outlet Point
GasSaver Outlet Point
To find part number fitting your region requirements see: Ordering Information
The even start flow provides a higher quality weld since you avoid the turbulence that can disturb the welding process. Risk for pores in the welded joint is minimized.
GasSaver Outlet Point
To find part number fitting your region requirements see: Ordering Information
The even start flow provides a higher quality weld since you avoid the turbulence that can disturb the welding process. Risk for pores in the welded joint is minimized.
Miller GasSaver Outlet Points are available for use with shielding gases to cover most MIG or TIG welding applications.
GasSaver Outlet Points do greatly reduce the gas surge that normally occurs at start-up.
Ready to be mounted on any central system with G3/8 inlet connection. For maximum gas saving, use an inlet pressure of 5 bar.
GasSaver Outlet Points have been developed for qualified shielding gas welding.
The even start flow provides a higher quality weld since you avoid the turbulence that can disturb the welding process. Risk for pores in the welded joint is minimized.
All materials are chosen for long-life operation without downtime and according to standards and regulations.
Shatter-resistant multi-scale flow tube. Tubes are made of shatter-resistant polycarbonate resin for operator safety.
What’s included
ORDERED SEPARATELY
Process
MIG/TIG |
General specification
Title | GasSaver Outlet Point |
Gases | Argon/Mix |
Flow Range | 0-34 l/min |
Maximum Inlet Pressure | 10 bar |
Inlet Connection | G3/8 |
Outlet Connection | G3/8 |