301456
Portable feeder designed to run off of arc voltage. When paired with an ArcReach® power source, provides remote control of the power source without a control cord — saving time and money.
As part of the ArcReach technology platform, the heater is an accessory for select ArcReach welding power sources.
The induction heating tools (air-cooled cables or air-cooled quick wraps) connect to the ArcReach Heater, which is powered by select on-site welding power sources.
ArcReach Heater systems allow economical, insourced weld preheating
With ArcReach Heater systems you can:
• Eliminate the costly overruns common with heating contractors
• Eliminate delays due to transitions between heating and welding crews
• Run your own schedule without depending on third-party contractors
• Use existing on-site welding equipment up to 60 m away as the heating power source
• Lower preheating costs
• Automatically and accurately document joint temperatures
• Eliminate safety concerns caused by traditional open-flame heating
The ArcReach Heater air-cooled induction heating system is specifically designed for preheating and bake-out applications up to 315°C, without the need for a cooler and coolant. Temperature control programs can be manually entered or loaded via USB drive. Heating data is automatically recorded and can be saved for use in quality control and documentation needs. The air-cooled cables and quick wraps are manufactured from durable high-temperature materials, and designed to withstand the tough conditions in both industrial and construction applications.
Improved working environment
during welding. Welders are not exposed to open flames, explosive gases and hot elements associated with fuel gas heating and resistance heating.
Easy setup
with flexibility to fit a variety of pipe diameters and plate lengths.
Uniform heating
is maintained along and through the heat zone by using induction heat within the material. The surface of the part is not marred by localized conducted heat at higher than specified temperatures.
Time-to-temperature
is faster than conventional processes due to the method of applying heat, reducing cycle time.
Compatible ArcReach power sources include:
Additional literature on ArcReach® Heater
Visit ArcReach® Heater page and learn more about this simple, cost-effective system for preheat and bake-out applications.
| Title | ArcReach® SuitCase® 12 |
| Applications | Shipbuilding
Construction Heavy manufacturing Rental |
| Input Power | 14–48 VDC/ 110 max. OCV |
| Input Welding Circuit Rating | 425 A at 60% duty cycle |
| Wire Feed Speed | 50–780 ipm (1.3–19.8 m/min.) |
| Wire Type and Diameter Capacity | Solid wire: .023– .052 in. (0.6–1.4 mm)
Flux-cored: .030– 5/64 in. (0.8–2.0 mm) |
| Max. Spool Size Capacity | 12 in. (305 mm)
45 lb. (20 kg) |
| Dimensions | H: 15.5 in. (394 mm)
W: 9 in. (229 mm) D: 21 in. (533 mm) |
| Weight | 15.9 kg |
301456
Portable feeder designed to run off of arc voltage. When paired with an ArcReach® power source, provides remote control of the power source without a control cord — saving time and money.
