GasSaver Outlet Point Lockable Flowmeter for Welding

To find part number fitting your region requirements see: Ordering Information

GasSaver is also available in a lockable version for exact gas flow. A real advantage if you wish to ensure the highest and most even welding quality, e.g. with ISO 9000 certification.

Spec Sheet (English)

Spec Sheet (French)

Spec Sheet (German)

Spec Sheet (Italian)

Spec Sheet (Spanish)

Features

Lockable version

GasSaver is also available in a lockable version for exact gas flow. A real advantage if you wish to ensure the highest and most even welding quality, e.g. with ISO 9000 certification.

Miller GasSaver Outlet Points are available for use with shielding gases to cover most MIG or TIG welding applications.

GasSaver Outlet Points do greatly reduce the gas surge that normally occurs at start-up.

Ready to be mounted on any central system with G3/8 inlet connection. For maximum gas saving, use an inlet pressure of 5 bar.

GasSaver Outlet Points have been developed for qualified shielding gas welding.

The even start flow provides a higher quality weld since you avoid the turbulence that can disturb the welding process. Risk for pores in the welded joint is minimized.

All materials are chosen for long-life operation without downtime and according to standards and regulations.

Shatter-resistant multi-scale flow tube. Tubes are made of shatter-resistant polycarbonate resin for operator safety.

Specification

Product literature

Process

MIG/TIG

General specification

Title	GasSaver Outlet Point Lockable
Gases	Argon/Mix
Flow Range	0-34 l/min
Maximum Inlet Pressure	10 bar
Inlet Connection	GasSaver Outlet Point G3/8 G3/8 34L lockable: G3/8 GasSaver Outlet Point G3/8 M12X1 34L lockable: G3/8
Outlet Connection	GasSaver Outlet Point G3/8 G3/8 34L lockable: G3/8 GasSaver Outlet Point G3/8 M12X1 34L lockable: M12X1