GasSaver Outlet Point Flowmeter for Welding

To find part number fitting your region requirements see: Ordering Information

The even start flow provides a higher quality weld since you avoid the turbulence that can disturb the welding process. Risk for pores in the welded joint is minimized.

Spec Sheet (English)

Spec Sheet (French)

Spec Sheet (German)

Spec Sheet (Italian)

Spec Sheet (Spanish)

Features

Miller GasSaver Outlet Points are available for use with shielding gases to cover most MIG or TIG welding applications.

GasSaver Outlet Points do greatly reduce the gas surge that normally occurs at start-up.

Ready to be mounted on any central system with G3/8 inlet connection. For maximum gas saving, use an inlet pressure of 5 bar.

GasSaver Outlet Points have been developed for qualified shielding gas welding.

The even start flow provides a higher quality weld since you avoid the turbulence that can disturb the welding process. Risk for pores in the welded joint is minimized.

All materials are chosen for long-life operation without downtime and according to standards and regulations.

Shatter-resistant multi-scale flow tube. Tubes are made of shatter-resistant polycarbonate resin for operator safety.

Specification

Product literature

Process

MIG/TIG

General specification

Title	GasSaver Outlet Point
Gases	Argon/Mix
Flow Range	0-34 l/min
Maximum Inlet Pressure	10 bar
Inlet Connection	G3/8
Outlet Connection	G3/8