To find part number fitting your region requirements see: Ordering Information
GasSaver Twin is available with an extra gas outlet for backing gas. This reduction valve is primarily used for welding where one wishes to take both the shielding gas and the backing gas from the same cylinder. The welding gas and backing gas can of course be adjusted separately in this solution.
Backing gas version
GasSaver Twin is available with an extra gas outlet for backing gas. This reduction valve is primarily used for welding where one wishes to take both the shielding gas and the backing gas from the same cylinder. The welding gas and backing gas can of course be adjusted separately in this solution.GasSaver unique two-stage reduction valve
has been developed for qualified shielding gas welding.The even start flow
provides a higher quality weld since you avoid the turbulence that can disturb the welding process. Risk for pores in the welded joint is minimized.Long-life operation
All materials are chosen for long-life operation without downtime and according to standards and regulations.Shatter-resistant multi-scale flow tube.
Tubes are made of shatter-resistant polycarbonate resin for operator safety.Large membrane
makes it easy to adjust and set the correct gas flow that you require.| MIG/TIG |
| Title | GasSaver (300 bar) |
| Gases | Argon/Mix Argon/H2Mix |
| Flow Range | 0-34 l/min |
| Maximum Inlet Pressure | 300 bar |
| Inlet Connection | GasSaver Twin AR/H2 W21.8L G3/8L 20+34L: W21.8 GasSaver Twin AR/H2 W21.8L G3/8L 34L+34L: W21.8 GasSaver Twin AR/MIX side entry G5/8 G3/8 34L+34L: G5/8 bullnose GasSaver Twin AR/MIX top entry G5/8 G3/8 34L+34L: G5/8 bullnose GasSaver Twin AR/MIX W21.8 G1/4 20L+20L: W21.8 GasSaver Twin AR/MIX W21.8 G1/4 34L+34L: W21.8 GasSaver Twin AR/MIX W21.8 G3/8 34L +34L: W21.8 GasSaver Twin AR/MIX W21.8 M12X1 34L+34L: W21.8 GasSaver Twin AR/MIX W24.52” Ext G3/8 34L+34L: W24.52” Ext |
| Outlet Connection | GasSaver Twin AR/H2 W21.8L G3/8L 20+34L: G3/8 GasSaver Twin AR/H2 W21.8L G3/8L 34L+34L: G3/8 GasSaver Twin AR/MIX side entry G5/8 G3/8 34L+34L: G3/8 GasSaver Twin AR/MIX top entry G5/8 G3/8 34L+34L: G3/8 GasSaver Twin AR/MIX W21.8 G1/4 20L+20L: G1/4 GasSaver Twin AR/MIX W21.8 G1/4 34L+34L: G1/4 GasSaver Twin AR/MIX W21.8 G3/8 34L +34L: G3/8 GasSaver Twin AR/MIX W21.8 M12X1 34L+34L: M12X1 GasSaver Twin AR/MIX W24.52” Ext G3/8 34L+34L: G3/8 |
To find part number fitting your region requirements see: Ordering Information
GasSaver Twin is available with an extra gas outlet for backing gas. This reduction valve is primarily used for welding where one wishes to take both the shielding gas and the backing gas from the same cylinder. The welding gas and backing gas can of course be adjusted separately in this solution.
