To find part number fitting your region requirements see: Ordering Information
The extremely pressure sensitive second stage greatly reduces the gas surge that normally occurs at start-up. This saves large amounts of shielding gas and ensures optimum weld quality due to minimized turbulence in the gas flow. 300 bar.
Trigger program switch
Re-call up to 4 preset programs from the torch trigger (any standard MIG torch) for increased productivity on complex objects.Miller robustness
Tested and approved for heavy duty welding under the toughest conditions. Miller goes to extreme measures to ensure trouble free welding in any environment.Heavy duty wire drive mechanism
The 4-roll drive system will ensure trouble free wire feeding.Energy efficient
The energy saving Fan-On-Demand™ power source cooling system operates only when needed, reducing noise and the amount of contaminants pulled though the machine.Full synergic MIG/MAG with presets
Synergic lines for all common wire/gas combinations with presets of start/stop parameters for optimal welds.Ease of use and versatility
Large intuitive LCD panel for quick and precise setting of advanced weld parameters.MigMatic® Compact Series
https://www.youtube.com/watch?v=vC8egPAGYGU| MIG/TIG |
| Title | GasSaver (300 bar) |
| Gases | Argon/Mix Argon/H2Mix |
| Flow Range | 0-34 l/min |
| Maximum Inlet Pressure | 300 bar |
| Inlet Connection | NEVOC |
| Outlet Connection | G3/8 |
To find part number fitting your region requirements see: Ordering Information
The extremely pressure sensitive second stage greatly reduces the gas surge that normally occurs at start-up. This saves large amounts of shielding gas and ensures optimum weld quality due to minimized turbulence in the gas flow. 300 bar.
