To find part number fitting your region requirements see: Ordering Information
GasSaver Twin is available with an extra gas outlet for backing gas. This reduction valve is primarily used for welding where one wishes to take both the shielding gas and the backing gas from the same cylinder. The welding gas and backing gas can of course be adjusted separately in this solution.
ClearLight™ Lens Technology
optimizes contrast and clarity in welding and light states. 1/1/1/2 optical clarity rating allows for a lighter light state while not welding — keeping the helmet down — maximizing safety and productivity.Four arc sensors and four modes
weld, cut, grind and X-Mode. X-Mode prevents sunlight from darkening the lens before welding starts and low-amperage lens opening from obstructed sensors.Headgear
provides extensive adjustability settings and a pivoting top for better fit and comfort.Digital controls
easily allow welder to adjust shade, delay and sensitivity.Auto-on/off
power control triggers lens at the strike of an arc.Meets ANSI Z87.1+, CSA and CE standards
| MIG/TIG |
| Title | GasSaver (300 bar) |
| Gases | Argon/Mix Argon/H2Mix |
| Flow Range | 0-34 l/min |
| Maximum Inlet Pressure | 300 bar |
| Inlet Connection | GasSaver Twin AR/H2 W21.8L G3/8L 20+34L: W21.8 GasSaver Twin AR/H2 W21.8L G3/8L 34L+34L: W21.8 GasSaver Twin AR/MIX side entry G5/8 G3/8 34L+34L: G5/8 bullnose GasSaver Twin AR/MIX top entry G5/8 G3/8 34L+34L: G5/8 bullnose GasSaver Twin AR/MIX W21.8 G1/4 20L+20L: W21.8 GasSaver Twin AR/MIX W21.8 G1/4 34L+34L: W21.8 GasSaver Twin AR/MIX W21.8 G3/8 34L +34L: W21.8 GasSaver Twin AR/MIX W21.8 M12X1 34L+34L: W21.8 GasSaver Twin AR/MIX W24.52” Ext G3/8 34L+34L: W24.52” Ext |
| Outlet Connection | GasSaver Twin AR/H2 W21.8L G3/8L 20+34L: G3/8 GasSaver Twin AR/H2 W21.8L G3/8L 34L+34L: G3/8 GasSaver Twin AR/MIX side entry G5/8 G3/8 34L+34L: G3/8 GasSaver Twin AR/MIX top entry G5/8 G3/8 34L+34L: G3/8 GasSaver Twin AR/MIX W21.8 G1/4 20L+20L: G1/4 GasSaver Twin AR/MIX W21.8 G1/4 34L+34L: G1/4 GasSaver Twin AR/MIX W21.8 G3/8 34L +34L: G3/8 GasSaver Twin AR/MIX W21.8 M12X1 34L+34L: M12X1 GasSaver Twin AR/MIX W24.52” Ext G3/8 34L+34L: G3/8 |
To find part number fitting your region requirements see: Ordering Information
GasSaver Twin is available with an extra gas outlet for backing gas. This reduction valve is primarily used for welding where one wishes to take both the shielding gas and the backing gas from the same cylinder. The welding gas and backing gas can of course be adjusted separately in this solution.
